polycarb_quote

Please fill out as completely as possible. Submit and allow 24 to 48 hours for a quote via e-mail.

* Indicates a Required Field for Return of a Requested Quote

*Full Name:
*Shipping Address:
*City:
*State/Province:
*Zip Code:
*Phone Number Including Area Code:
*Your E-mail:

Note: Sheets must be cut from standard size lengths, i.e. 8', 10', 12' and up to 48' long (example in yellow below). You will have to pay for any unused portion leftover, after all sheets are cut. For example, a single 7' sheet must be cut from a standard 8' sheet with one foot of leftover, but two 7' sheets could be cut from a standard 14' sheet with no leftover). Any single sheet less than 8' long (i.e. 2', 3', 4', 5', 6', & 7') must be cut from a standard 8' long sheet and the cost would be for a standard 8' sheet.

POLYCARBONATE UV PROTECTED PANELING
Polycarbonate Description:
Standard Width:
Sheet Length:			Optional Sheet Sizes: If you require a variety of sizes and thickness, describe your needs in the box below.
Quantity (Number of Sheets):

POLYCARBONATE PROFILES

U - PROFILE	STANDARD H - PROFILE	SNAP H - PROFILE

U - Profile:
(Purchase in standard lengths of 12 ft.)

Quantity

We can finish cut standard pieces at left, into lengths you specify at the time of your order.

Standard H - Profile:
(Purchase in standard lengths of 24 ft.)

Snap H - Profile:
(Purchase in standard lengths of 24 ft.)

FASTENERS
Stainless Steel 304 Screw: Hex Head Screw #9 x 1-1/2in lg w/1/2" diameter neoprene/steel washer	Size	Quantity
	-
Top Sealing Aluminum Tape: (*for sealing top of panel)*
Bottom Vent Tape: (*for sealing bottom of panel)*	-
Comments: