greenhouse examples - building greenhouses


This structure was originally covered with glass, but after the glass broke, our panels and trim were used to bring it back to life!		This custom Lean-To fits perfectly on the patio. Protected from the elements, it is easily accessible from the back door.

Satisfied customers continue to come up with innovative uses for our greenhouse panels and continuous roll covering in their gardens. They often share their ideas and suggestions with us, and we included many of them in the continuous improvements we make to greenhouses. EnviroCept Greenhouses, etc customers are full of great ideas. EnviroCept sells panels, U-Trim, and H-Channel which enable our customers to create custom structures to meet their specific needs.

Our customers often share their ideas for new products and modifications to our products. We work with these ideas to improve our products and help our customers get the right paneling and trim for the job. Customers create their own structures to meet their specific gardening, growing, and storage needs. It also allows for flexibility to use the structure through-out the year. Many customers have used the panels to customize a shed or existing structure into a ‘sunroom' structure.

The paneling and trim offer an abundance of applications, limited only by your imagination. We hope these examples will help with your project. On this page you can check out what others have done and see if your ideas are in the ball park!

Feel free to send us your photographs!

Many gardening enthusiasts use corrugated plastic to recover an existing building or shed, turning it into a "sunroom" structure. If you would like to create a unique garden greenhouse structure to meet your specific requirements, please call us at 1-888-326-8634. Our customer care specialists will answer your questions regarding the application and use of corrugated plastic greenhouse covering.

			The raised bed planter rings were made with remnant panels. The rings used as mini cold frames, were covered with plastic bags at night. This use of corrugated plastic added three to four weeks on either end of the growing season. Planting earlier and harvesting later meant more fresh produce on the table for this innovative gardening enthusiast in Oregon.
This shed was turned into a dual-purpose garden shed and greenhouse using our double-walled greenhouse panels as a glazing material.

"DESIGN AND BUILD YOUR OWN"

free greenhouse planning and building guide 'click here'


Seventy one year old Margaret Lawrence and her sister assembled a structure themselves...do they like it? "Our greenhouse is working so well that I have had to top the tomatoes 4 times this season. We have 'toms' everywhere!"

end view inside birds-eye

Our Building Kits Are Easy To Assemble

Use simple household tools and follow the illustrated instructions. Some models take as little as 8 hours to complete. Precise framing alignment is easy with the custom snap T's and corner braces included with your kit. The flexible paneling curves to fit the contour of the pre-cut frame. Galvanized, self-tapping screws with neoprene washers provide secure watertight panel attachment. Slip the U-Channel and H-Channel trim into place and you're ready!

Site Preparation

Very little site preparation is required for your kit. You can assemble it on your lawn, over bare ground, on a gravel base, over a wood deck, on a concrete slab, or a brick patio. Smaller models are even portable so you can take advantage of the best light in any season. Just make sure the base is securely anchored to a firm surface.

The Tools You'll Need

Phillips screwdriver, Large Variable Speed Drill, Sharp Knife, Tape Measure, Step Ladder, Silicon Caulk.

Check out our SPECIAL ACCESSORIES PAGE. It will help you complete and operate the finished project!postage paid.

Now you can have the finest greenhouse available at a price you can afford!
Happy Gardening...

"an EnviroCept Company"

greenhouse examples and building greenhouses ideas